Global Ferronickel Holdings, Inc.’s H1 net income more than triples to P640.8 million

by Philippine Resources - August 17, 2021

Photo Credit: Bilyonaryo

Global Ferronickel Holdings, Inc. (FNI), the country’s second-largest nickel ore producer, recorded H1 net income of P640.8 million against the P195.8 million it posted during the same period last year. Revenues are up by 68.9% to P2.61 billion compared to P1.54 billion during the same period last year mainly due to higher nickel ore prices and increased shipment volume.

“We garnered more favorable results this year as the market experienced a big jump in the price of low-grade nickel ore. We did not experience a stoppage of operations as what happened in April last year,” said FNI President Dante R. Bravo.

The Group completed 32 nickel ore shipments in H1 2021 against 23 shipments during the same period last year resulting in a 38.3% increase in shipment volume to 1.740 million WMT against the 1.258 million WMT in 2020. These were 100% exported to China and consisted of 1.465 million WMT low-grade nickel ore and 0.275 million WMT medium-grade nickel ore. The resulting sales mix is 84% low-grade ore and 16% medium-grade ore in 2021 compared to 52% low-grade ore and 48% medium-grade ore in the previous year.

The overall average realized nickel ore price for the period ending 30 June 2021 was USD 31.10/WMT compared to USD 24.38/WMT for the period ending 30 June 2020, higher by USD 6.72/WMT or 27.6%. The price of low-grade ore went up by 61.7% to USD 31.01/WMT in 2021 against the 2020 price of USD 19.18/ WMT. Medium-grade ore, on the other hand, was USD 31.58/WMT or 5.2% higher than the 2020 price of USD 30.03/WMT.

To date, FNI has spent over 35 million pesos on its COVID-19 response. It works closely with various local government units in helping the local communities combat the spread of the virus and providing relief during this time of need. It has donated PPE supplies, test kits, disinfectants, vitamins, medical equipment, medical services, rice and other essential goods, and participated in building a molecular laboratory in Surigao and a COVID-19 test center in Palawan.


Article Courtesy of the Philippine Stock Exchange

Place your Ad Here!

Related Articles


Philippine Resources - December 17, 2021

Global Ferronickel Holdings, Inc.’s net income in the first 3 quarters up 19.4% to P1.86 billion

Photo credit: Global Ferronickel Holdings Global Ferronickel Holdings, Inc. (FNI), the country’s second-largest nickel ore producer, recorded Q3 net income of P1.22B in 2021 against the P1.36B it posted during the same period last year. This brought total earnings for the first three quarters of the year to P1.86 billion, up 19.4% from the P1.56 billion it posted during the same period last year. Revenues for the first nine months of the year are up 15.3% to P6.41 billion compared to the P5.55 billion during the same period in 2020 buoyed by the higher prices of nickel ore. The sale of nickel ore for the nine months ended September 30, 2021 was 4.228 million WMT, lower by 0.151 million WMT or 3.4%, compared to 4.379 million WMT of nickel ore in the nine months ended September 30, 2020. This is mainly due to bad weather conditions, which allowed the Group to only ship 78 vessels of nickel ore against the 80 vessels during the same period last year. The resulting sales mix was 81% low-grade ore and 19% medium-grade ore in 2021 versus the previous period’s mix of 59% low-grade ore and 41% medium-grade ore. These were exported 100% to China and consisted of 3.424 million WMT low-grade nickel ore and 0.804 million WMT medium-grade nickel ore compared to 2.588 million WMT low-grade nickel ore and 1.791 WMT medium-grade nickel ore for the same period in 2020. “We are happy with the results. Despite the heavy rains hampering operations and more expensive fuel prices, the continued rise of nickel ore prices driven by the strong demand from China will augur well for the industry,” said FNI President Dante R. Bravo. The overall average realized nickel ore price for the period ended 30 September 2021 was US$30.78/WMT compared to US$25.56/WMT for the period ended 30 September 2020, higher by US$5.22/WMT or 20.4%. The price of low-grade ore went up by 35.4% to US$29.79/WMT in 2021 against the 2020 price of US$22.01/ WMT. Medium-grade ore, on the other hand, was US$34.99/WMT or 14.0% higher than the 2020 price of US$30.69/WMT.   Article courtesy of the Philippine Stock Exchange


Philippine Resources - March 30, 2022

Global Ferronickel Holdings, Inc.’s 2021 net income up 5.9% to ₱1.98B

Photo credit: Global Ferronickel Holdings Global Ferronickel Holdings, Inc. (FNI), the country’s second-largest nickel ore producer, recorded a 5.9% net income increase of ₱1.98 billion for the year ended December 31, 2021, compared to ₱1.87 billion in the same period last year. Revenues are up by ₱445.5 million or 6.1% to ₱7.71 billion in 2021 against the ₱7.26 billion in 2020. “2021 has been a good year for FNI as we received the Presidential Mineral Industry Environmental Award. It is the highest honor bestowed upon responsible mining companies by the Department of Environment and Natural Resources,” said FNI President Dante R. Bravo. “We are also delighted with the continued surge in nickel prices, which has allowed us to grow our top and bottom line despite having experienced relatively bad weather conditions throughout last year’s mining season.” The bad weather constituted a lower shipment volume of 13.1% as the Group only managed to ship 90 vessels of nickel ore for a total of 4.887 million WMT in 2021 against the 103 vessels totaling 5.625 million WMT in 2020. The resulting product mix was 77% (3.761 millionWMT) low-grade ore and 23% (1.126 million WMT) medium-grade ore in 2021 versus last year’s mix of 68% (3.831 million WMT) low-grade ore and 32% (1.794 million WMT) medium-grade ore. The overall average realized nickel ore price for the year ended December 31, 2021 was higher by 21.5%, US$31.78/WMT compared to US$26.16/WMT for the year ended December 31, 2020. Low-grade ore was 22.2% higher, US$30.07/WMT in 2021 compared to US$24.61/WMT in 2020. Medium-grade ore was 27.2% higher, US$37.47/WMT in 2021 compared to US$29.47/WMT in 2020. “We are hoping to have more favorable weather conditions in our Cagdianao site this year to boost production, said Mr. Bravo.   Article courtesy of Global Ferronickel Holdings


Philippine Resources - April 22, 2022

Platinum Group Metals Corporation’s first shipment underway and targets 5.5M WMT for 2022

Photo credit: Global Ferronickel Holdings, Inc. Global Ferronickel Holdings, Inc. (FNI) is off to a strong start as Platinum Group Metals Corporation (PGMC) begins its shipment to customers in China with 53,700 WMT of low-grade nickel ore bound for Guangdong Century Tsingshan Nickel Industry Co., Ltd. (GCTNICL). PGMC is the second-largest value exporter of nickel ore in the country. It is a wholly-owned subsidiary of FNI. “We are upbeat that our mining operations at PGMC have been running seamlessly from the get-go. Weather permitting, we might be able to exceed this year’s target of 5.5 WMT consisting of 60% low-grade ore and 40% medium-grade ore,” said FNI President Dante R. Bravo. Around half of PGMC’s shipment target for 2022 has been slated for, and the rest will be open to other customers. PGMC has a general nickel ore supply contract with GCTNICL and Baosteel Resources International Co. Ltd. for 20 and 30 shipments, respectively. Prevailing market prices for all customers will be determined at the time of their individual order confirmation. “We remain bullish as demand from China continues to be strong, and nickel prices have been rising in recent years. And with current global events adversely affecting oil prices, there is a greater appreciation for electric vehicles, which use nickel for their rechargeable batteries,” said Mr. Bravo.   Article courtesy of the Philippine Stock Exchange

Place your Ad Here!

Recent Articles


Philippine Resources - May 23, 2023


Photo credit: TVI Resource Development The Board of RTG Mining Inc. is pleased to announce that a comprehensive settlement of all outstanding issues with the Villar Family controlled Sage Capital and TVI Resource Development (Phils.) Inc. (“TVIRD”) has been reached and a binding Memorandum of Agreement signed. On execution of the final documents, expected in the next month, all litigation that RTG had launched will be withdrawn as part of an agreed restructuring of the Mabilo Project. The Villar Family is one of the most prominent families in the Philippines and RTG is pleased to partner with them in the development of the Mabilo Project, which is a significant mining project for the country. The key terms of the agreement for RTG include the following: RTG (through SRM Gold Limited) will retain a 40% interest in Mt. Labo Exploration and Development Corporation (“Mt. Labo”) with the project also developed by Mt. Labo, in line with Philippine regulatory requirements, with Sage Capital (which is owned by TVIRD) holding the remaining 60%; RTG will have a 2% net smelter royalty (“NSR”); RTG’s debt together with interest, currently in the order of US$27M (subject to audit) will be repaid out of the proceeds of Stage 1 of the project, the Direct Shipping Operation subject to customary requirements to address liquidity and ongoing operations of Mt. Labo; Funding arrangements for the project as between the major shareholders of Mt. Labo have been successfully renegotiated, (relieving RTG of a sole funding obligation) and replaced with a pro-rata funding obligation, together with a disproportionate funding obligation of Sage Capital, as set out below; With debt repayments in full and the NSR, RTG will be entitled to approximately 57% of the proceeds of Stage 1, the Direct Shipping Operation; RTG will be entitled to 40% of the operating cashflow of the project, together with the 2% NSR and repayment of its debt, which is currently in the order of US$27M; The first US$5M of expenditure for Mt. Labo (or 12 months of expenditure, whichever occurs the earlier), will be funded pro-rata between the two shareholders (ie RTG will provide 40%) and thereafter, Sage Capital/TVIRD will sole fund the next US$5M of expenditure, with all additional funding thereafter to be provided on a pro-rata basis; All parties are required to act in the best interests of the project and not compete; A shareholders’ agreement will be finalised which will provide typical minority interest protection clauses including reserve matters for voting including annual budgets and appointments of key personnel; Any disputes will be resolved by the Singapore International Arbitration Centre; and On completion of final signed documents, all litigation matters will be withdrawn and settled in full. With the restructuring of the Mabilo Project now agreed, over the balance of this year, the remaining permitting matters and financing plans will be finalised, a review of the 2016 Feasibility Study will be completed, together with finalising the acquisition of surface rights, following which, a commitment to development will be formalised by the Board of Mt. Labo. RTG is pleased with the outcome of the discussions and the co-operative and constructive approach adopted by the Villar Family representatives. RTG believes they can be a strong and positive partner to work with to take the Mabilo Project forward, with both a near term development and future exploration activities to expand the project, which will start to unlock the value of the project for all stakeholders, not only the local communities but for the country as a whole.


Philippine Resources - May 22, 2023

Mining Operational Excellence Through Digital Transformation

Part 1: Mining Operation Challenges and Mine Operations Management Domains 1 & 2. By Mae Ann Cabasag, EM Mining companies encounter numerous challenges throughout their operations. However, initiatives to mitigate these challenges and improve efficiency are often limited. Most of these limitations emanated from a common factor: the challenge of “poor visibility” in mining operations. A viable solution is to adopt digital transformation in mining operations by incorporating available real-time data into an integrated system— capable of ensuring automatic updates and reliable source of information. Through this, mining companies not only understand simulations and plans developed but also anticipate potential outcomes. Various mining industry analysts have found that using non-digital methods in the mining operations can lead to a 27% reduction in production time and 25% increase in data inaccuracy. For a mining company to remain competitive in an industry susceptible to operation challenges, i.e. production processes, workers’ and equipment performances, ore quality and quantity, compliance to regulations, and inter-departmental collaboration, it needs to embrace digital transformation. Dassault Systèmes Mine Operations Management provides transformative digital solution for mining companies to achieve excellence in their operations. Mine Operations Management (MOM) equips mining companies with an integrated system for their mining operations, enabling them to achieve efficient plan and schedule. This system integrates entire operation data into a single repository source of information, known as the “single source of truth”, ensuring complete transparency of the company’s processes from mine to port. By leveraging MOM, we can address the following global mining industry challenges: Maintaining competitiveness amidst market volatility. Eliminating waste materials, poor communication, and error duplication. Improving site productivity and efficiency. Utilizing assets and sharing best practices across the value chain. Ensuring an utmost level of safety. Reducing environmental impacts and achieving sustainable operations. The transformative digital solution, Mine Operations Management, is composed of eight work packages, split across four domains, namely: Data Management, Material Reconciliation, Operational Control, and Assets Performance. These domains help generate valuable insights from integrated operational data for rapid and informed strategic decision-making.  The Data Management consists of Master Data Model and Integration Framework packages essential for material tracking, stockpile management, task and workforce management, machine performance, and asset maintenance. It enables users to manage master data objects such as Site, Material, Location, Equipment, and Operator through manual data entry or third-party source systems.  With this, mining companies can ensure efficient and integrated management of critical data required for seamless operations. Material Reconciliation, on the other hand, consists of Material Tracking and Stockpile Management packages. Material Tracking enables us to track material movements across different stages, i.e. from the least accurate grade estimated in geological model to the most precise information on shipped material quantity and quality, to account for any inaccuracies. While in the Stockpile Management, users not only can calculate daily stockpile balance, add Survey or Sampling data, analyze inventory levels and trends, create graphical representation of the stockpile balances and movements, calibrate stockpile using volumetric survey and sampling, enables comparison of different models, track movement genealogy and review stockpile slices for stockpiles with LIFO and FIFO calculation type but can create a different type of analysis such as actual vs plan vs model. In the upcoming article, we will explore the two remaining domains of Mine Operations Management to where assigning operational tasks, tracking compliance to plan, monitoring equipment down to workers’ performance are feasible in the mining operations. To know more about MOM, mining innovations and solutions, contact Dassault Systèmes Value Solutions Partner: Paramina Earth Technologies Inc. through   References: Make it happen for mine execution excellence: Dassault Systèmes®. MEGATrends. (n.d.).  Dassault Systèmes. (2021, August 12). Digging deeper: The virtual solution for Mining Operational Excellence. Dassault Systèmes. excellence  dassault3ds. (2022, June 16). The mining industry needs to adapt, but how? Dassault Systèmes blog.


Philippine Resources - May 22, 2023

Customer’s First Choice: Sandvik Philippines Delivers 11th and 12th Pantera DP1500i Drills to Filminera Resources Corporation

Sandvik Philippines has successfully commissioned and delivered to loyal customer Filminera Resources Corporation (“Filminera”) their 11th and 12th Pantera DP1500i Top-hammer Surface Drills last 25 January 2023 at the Masbate Gold Project (MGP) located in Masbate Island, Philippines. Photo shows Sandvik Technician Larry Lugnas (second from left) and Service Operations Manager Jorge Cabello (third from left) handing over the drills to MGP representatives. Located 360 km southeast of Manila, the Masbate Mine is operated by Filminera, the Philippine subsidiary of TSX- and NYSE-listed B2Gold with headquarters in Vancouver. In 2022, the mine produced a record-setting 212,728 oz of gold out of 7.93M tonnes of ore milled at an average grade of 1.11 g/t.  B2Gold also operates the Fekola Mine in Mali and the Otjikoto Mine in Namibia. Their projects under development include the Anaconda Area in Mali and the Gramalote JV Project in Colombia. The Masbate Mine started operating in 2008 initially using 4 x Atlas Copco ECM660 Drills owned and operated by the erstwhile mining contractor, Leighton. When the opportunity for re-fleeting came about in 2012, Sandvik succeeded in winning the tender which came packaged with a full maintenance contract for 24,000 service meter hours of five years. Ironically, the said maintenance contract almost led to the cancellation of the order for the first 4 x DP1500i due to a dispute with the rates. Eventually, both Leighton and Sandvik were able to arrive at a mutually acceptable arrangement, and Sandvik ran the service contract for five years without incurring penalties in the availability guarantees. The contract was so profitable, Sandvik even had to share some of the residual profit at the end with Filminera under the pain-and-gain proviso of the contract. The next re-fleeting opportunity came in 2017, with the Masbate Mine. This time, there was no service contract attached to the equipment and Leighton was no longer the mining contractor; the mine has shifted to owner-miner operation. Sandvik managed to secure the repeat order for another batch of 4x DP1500i, banking on the proven performance and reliability of the first four. That brings the total to 8 units. Drill numbers 9 and 10 were ordered in July 2020 and delivered in 2021. Numbers 11 and 12 in the photo above were ordered in January 2022 and are now handed over to the customer. Filminera ordered two more DP1500i’s in November 2022; these machines are now awaiting completion in Tampere, for delivery later this year. That should bring the total to 14 x DP1500i units spread over 11 years for our most loyal Pantera DP1500i customer in the Philippines – Filminera Resources Corporation!

Place your Ad Here!

Place your Ad Here!

Join the Philippines'

Mining, Construction and Industry Community

Be the "First" to get our exclusive Digital Magazine & Newsletter.