Weir Minerals announces new partnership with XMPro, a digital twin platform, to enhance its Synertrex® digital ecosystem and provide its customers with real-time decision support
by Philippine Resources - March 30, 2022
Photo: Weir Minerals Synertrex® Monitoring Centre in the UK
Weir Minerals has announced a new partnership with XMPro, a leading digital twin platform. The partnership will enable intelligent equipment and services and support miners to achieve higher performance while also reducing the environmental footprint of their operations.
The XMPro platform – as a part of the Synertrex® digital ecosystem – will facilitate the delivery of event intelligence, predictive analytics, and real-time insights. It allows for data orchestration and value creation from multiple sources, including sensors, miners’ digital ecosystems, and data only available to Weir Minerals as an OEM, like maintenance data and 3D engineering models.
The platform identifies critical events by applying AI and predictive analytics, which will provide Weir Minerals’ customers with the next generation of predictive services and recommended actions. XMPro facilitates easy collaboration between reliability engineering and operations by providing real-time information and equipment insights, viewed via mobile devices and the Synertrex® intelligence web portal.
Weir Minerals also recently signed a digital partnership framework for strategic cooperation with AVEVA, an end-to-end pioneering industrial software provider. Weir Minerals will utilise the AVEVA PI System to collect and contextualise IIoT data streams, which will become the IIoT data foundation of its Synertrex® digital ecosystem.
Ole Knudsen, Weir Minerals, Director Digital, said:
“XMPro takes an actionable and collaborative approach to data that closely aligns with our Synertrex digital ecosystem. It is a platform ensuring maximum customer value from all the data we collect, ranging from equipment and process data to the in-house data we have access to as an OEM. We see the multiple data source approach as essential to build the holistic digital twins providing “intelligence” to our customers in terms of insights, predictiveness, and recommendations allowing for a proactive approach to maintenance planning and execution.
Within the foreseeable future, we see these platforms and the building of the multiple data-source digital twins providing even more value for Weir Minerals and our customers, which is enabled by closing the loop between real-time operations, equipment design, and manufacturing.”
Pieter van Schalkwyk, CEO XMPro, said:
“The partnership between Weir and XMPro creates a unique opportunity for mining companies to accelerate their digital transformation journey for complex assets. It combines Weir’s deep domain expertise and rich asset information models with XMPro’s class-leading real-time, operational digital twin platform. This combination provides unique insights, prescriptive maintenance and operations recommendations for users of Weir’s extensive range of mining equipment.
It has been a pleasure working with Weir’s engineering team, who are not only deep domain experts on mining processes but also have a clear vision of their roadmap for digital solutions that provide real-time operational intelligence for the overall mining value chain. We are excited that XMPro is the platform that Weir chose to deliver these capabilities to end-users.”
Place your Ad Here!
Philippine Resources - May 24, 2021
Weir Minerals announces major order of Enduron® HPGR with IAMGOLD
Weir Minerals is proud to announce another major order of Enduron® HPGR in Gold application with our valued Customer IAMGOLD. An Enduron® HPGR with rolls measuring 2.4 m x 2.4 m (length : diameter) will be installed at IAMGOLD's Côté Gold Project. This will be the largest HPGR in Canada and the largest in the world in a gold hard rock application. Weir Minerals’ Enduron® HPGR unique design is perfectly suited to IAMGOLD’s Côté Gold operations to achieve industry-leading particle size reduction and with the lowest total operating costs. Enduron® HPGR is the market proven HPGR with the mechanical design to support efficient and durable skewing thanks to its unique bearing arrangement and control philosophy Enduron® HPGR has a unique roll diameter-width ratio which maximizes throughput at the desired product grind Enduron® HPGR self-adjusting cheek plates provide equal sealing distance as flanges at minimum costs Enduron® HPGR is the market leader in large format, high tonnage hard rock HPGR Tim Lundquist, HPGR Regional Sales Manager North America: “Our Enduron® HPGR design will create energy savings of up to 40% compared to an equivalent SABC comminution circuit, while also significantly reducing the need for downstream grinding media. This power and grinding media savings will optimize total ownership cost and also account for a significant reduction in carbon emissions”. Weir Minerals prides itself in being close to its customers at all times. Our Weir Minerals Canada team and purpose-built facilities will be providing full HPGR service for the Côté Gold operations. For more information about Enduron® HPGR please visit enduronhpgr.weir
Philippine Resources - July 01, 2021
Weir Minerals Launches Multiflo® Mudflorm Submersible Pump for Large Particle Handling
Weir Minerals, global leader in the provision of mill circuit technology, dewatering solutions and services, has launched the new Multiflo® MudfloTM hydraulic submersible slurry pump. Engineered for abrasive applications and large particle handling, the Multiflo® MudfloTM pump features a hydraulically driven wet-end specifically designed to efficiently and safely reprocess and relocate tailings ponds, maintain water retention dams and manage slimes and sludge ponds. The innovative solution combines the Warman® MGS pump-end, Multiflo® CB32 hydraulic cutters and ESCO® excavation teeth to provide efficient pumping of highly charged and abrasive slurries. Weir Minerals' unique Ultrachrome® A05 chrome alloy impeller ensures high wear resistance and the specially engineered suction strainer minimises the risk of clogging by preventing large solids & debris from entering the pump. Drawing on decades of Warman® pump design experience, the Multiflo® Mudflo™ pump is capable of pumping between 150 and 1,200m3/h, up to 82m head. The Multiflo® CB32 hydraulic cutters feature market-leading ESCO® Ultralok® tooth system to prevent premature breakage, avoid tooth loss and protect the integral locking system to ensure the continuous operation of the pump. Engineered by the Weir Minerals dewatering pump experts in Australia, it is available for global customers from July 2021. “The Multiflo brand is synonymous with high quality and long-lasting equipment. In designing the Mudflo pump, our dewatering experts drew from the very best Multiflo, Warman and ESCO technology and used advanced hydraulics to create an innovative and cost-effective new solution for mine dredging applications,” Cameron Murphy, Director of Dewatering Weir Minerals APAC said. Weir Minerals understands that success is built from enduring partnerships based on close collaboration and a mutual commitment to safety and technical excellence. “It is not uncommon for sites to use a combination of pumps, shovels, excavators and trucks for dredging applications. When one of our long-time partners in Indonesia contacted us about developing a custom solution for the slurry build-up in their sumps, we knew we could provide a better solution,” Geoff Way, Weir Minerals Dewatering Specialist said. “We’re problem solvers. We considered our customer’s pain points and engineered a new solution to efficiently and safely manage their site processes,” he said. The Multiflo® MudfloTM pump can also be retrofitted to competitor OEM equipment; the quick-hitch plate attachment ensures convenient installation and removal from hydraulic excavators. The Multiflo® Mudflo™ pump can be assembled on land, eliminating the safety risks associated with assembling pumps over water. Furthermore, the new hydraulic hose management system reduces the risk of hose entanglement and trip hazards, all the while providing a reliable hose bend radius to ensure smooth oil flow. The Multiflo® MudfloTM pump will be available globally from July 2021. Discover more at https://info.global.weir/mudflo
Philippine Resources - May 11, 2021
New Report Identifies Major Carbon Reduction Opportunities in Global Mining
New analysis lays out the scale of the mining industry’s energy use and identifies ways it can be reduced using currently available technologies Materials such as copper, lithium and nickel play an essential role in the technologies like electric vehicles and renewables that will help the world meet its decarbonisation targets As demand for these metals increases, the mining industry must itself become more efficient and environmentally sustainable The global mining industry must move away from legacy systems and processes if it is to meet the challenge of decarbonisation, according to a new report released today which calculates mining’s share of global energy consumption and identifies ways the industry can aid the transition to net zero emissions needed to limit temperatures in line with the Paris Agreement. The report, commissioned by the Weir Group plc, analyses mine energy data from over 40 published studies to give a comprehensive understanding of where energy is consumed in mining and minerals processing. It shows that the total amount of power used by the mining industry – which plays an essential role providing the metals used at the heart of the modern economy – is equal to c.3.5% of global energy use. The metals produced by mining are critical for enabling the global transition to low-carbon infrastructure. But without action, energy use in mining itself is set to trend higher in the coming years as demand increases for metals like copper, nickel and zinc. The report suggests there are technologies available today that could make a significant difference to this trend. For example, it highlights that comminution – i.e. crushing and grinding processes – is the single biggest user of energy at mine sites, typically accounting for 25% of mining’s final energy consumption. This is equivalent to the power used by 221 million typical UK homes, or c.1% of total consumption globally. Comminution is therefore a natural target for the most impactful energy savings opportunities. Small improvements in comminution technologies can lead to relatively large savings in both energy consumption and greenhouse gas emissions. For example, a 5% incremental improvement in energy efficiency across comminution could result in greenhouse gas emissions reductions of more than 30m tonnes of CO2-e. The replacement of traditional comminution equipment with new grinding technology also reduces indirect emissions in the mining value chain, for example by removing the need for the manufacture of emission-intensive steel grinding balls. Of the remaining energy consumption by the mining industry, diesel in varied forms of mobile equipment accounts for 46%, electricity in mining (ventilation) 15% and “other electricity” 14%. Other significant opportunities identified by the report for reducing mining’s energy consumption include optimisation, big data and artificial intelligence. In addition, if zero emissions energy sources are deployed for mining equipment – e.g., renewable energy, energy storage and alternative fuels – then the industry may well be able to achieve zero emissions, leaving a relatively small role for offsets and carbon credits to play. The report comes as the mining industry is under ever-greater pressure to produce essential minerals that support some of the biggest global structural trends, from population growth to urbanisation and decarbonisation. Copper, nickel, steel and lithium are core components of electricity transmission and storage, electric vehicles and renewable energy infrastructure. The move to a decarbonised economy will result in increased primary consumption of these mined commodities, even after factoring for recycling, so it is important that mining itself becomes more sustainable. Download the independent Mining Energy Consumption 2021 report here: www.energysavingsinmining.com Commenting, Weir Group Chief Executive Jon Stanton said: “The mining industry is central to economic development globally, with critical minerals enabling the low-carbon transition required in the rest of the economy. But the environment in which it will operate in future will be very different from the past, requiring comprehensive change and investment. In short: mining needs to become more sustainable and efficient if it is to provide essential resources the world needs for decarbonisation while reducing its own environmental impact.This report is an important contribution to that debate which we hope will spark thoughtful conversations around the world on the way forward.” Alison Keogh, Chief Executive of the Coalition for Energy Efficient Comminution, said: “This report highlights both a challenge and an opportunity to revitalize cross-industry discussion and actions on decarbonisation and ESG solutions. We invite industry leaders to actively contribute and collaborate through mining-vendor-research partnerships and share knowledge. Together, we can accelerate improved energy, emissions and water footprint across industry faster.” Ricardo Garib, Weir Minerals Divisional President commented: “Weir Minerals is focused on making mining more efficient and sustainable by leading technology change in the industry. Our Enduron HPGRs are increasingly replacing conventional milling systems in comminution (crushing, screening and grinding) circuits because of their substantially lower energy consumption, finer rock reduction requiring less water downstream and potential for significant total cost of ownership reductions.” Stuart Hayton, Managing Director of Weir Minerals Netherlands, where the Enduron® HPGRs are designed and manufactured, added: “Not only do Enduron HPGRs require as much as 40% less energy than traditional alternatives, their wearable components last much longer and the maintenance time required to replace worn out parts is significantly lower. The estimated carbon saving of each Enduron HPGR in operation is equivalent to taking more than 3,600 petrol fuelled cars off the roads each year.” Notes: The report quantifies energy use in five commodities: copper, gold, iron ore, nickel and lithium. Bringing together mine energy use data from more than 40 published studies (each of which references dozens more studies) from 2007 to 2020 into a single narrative, the report aims to build a more comprehensive understanding of energy use in the mining industry. Using the current production rates of the commodities in question, and the energy intensities for each of the commodities, a total of 1,68 EJ/a (1,680,000,000,000,000,000 joules per year) has been calculated. This is approximately 0.5% of total final energy consumption globally. Published information indicates that the entire mining industry consumes approximately 12 EJ per year – or 3.5% of total final energy consumption globally. Assuming that present trends continue, there will be 250m electric vehicles on the road by 2030. To meet this demand, production of cobalt, lithium, graphite and nickel will need to be scaled up significantly. Current projections show that the current rate of decarbonisation globally is far below what is required to meet the goals of the Paris Agreement. A sustained decarbonisation rate of up to 7% per year, year on year should be sufficient to achieve the goal of a temperature increase of well below 2°C by 2100. For the mining industry, there are multiple ways to achieve decarbonisation including energy efficiency and fuel/energy switching. Many of these opportunities are starting to be explored by both the mining companies and the mining services providers, who see decarbonisation and energy reduction as a key way to reduce exposure to the risks of climate change.
Philippine Resources - May 26, 2022
Legal framework needed for gov’t to invest in nuclear power plant
Department of Energy (DOE) Undersecretary Gerardo Erguiza Jr. said there is a need to amend the Electric Power Industry Reform Act (EPIRA) to enable the government to invest in nuclear power plants. This, as the incoming administration has expressed its support in considering a nuclear power plant to be part of the country’s energy mix. “As of now, the government does not have the ability to put up conventional nuclear power plant because the National Power Corp. does not have mandate on this,” Erguiza said in Filipino during the Laging Handa public briefing Wednesday. With the privatization of the power sector under the EPIRA, the government could not enter into power generation. “But we can align together, with the drafting or putting up of the regulatory framework, we can amend our laws to include the government among those that can fund a nuclear power plant,” he added. Erguiza said that based on studies of the Korean Hydro Nuclear Power Company of South Korea and ROSATOM of Russia, they have found out that the Bataan Nuclear Power Plant (BNPP) can still be rehabilitated. According to ROSATOM, an investment of around USD3 billion to USD4 billion is needed to revive the BNPP. Presumptive President Ferdinand “Bongbong” Marcos Jr. earlier mentioned that part of his energy agenda is to revive the BNPP to become an additional source of clean and cheap power. On the other hand, Erguiza said the government can invest in power generation using small modular reactors, the latest nuclear energy technology, in missionary areas that are not connected to the grid.
Philippine Resources - May 26, 2022
Dutch gov’t backs SMC, Boskalis in P740 billion Bulacan Airport project
Photo credit: Palafox Dutch gov’t backs SMC, Boskalis in P740 billion Bulacan Airport project San Miguel Corporation (SMC) received its strongest support yet for its game-changing P740-billion New Manila International Airport (NMIA) project in Bulacan following the approval of the Dutch government of an export credit insurance (ECI) for the project’s land development phase. The approval comes after over a year of rigorous review of the project’s long-term environmental and social impact mitigation measures to ensure that the multi-billion project is done with sustainability in mind and aligned with the country’s climate ambitions. The Dutch government, represented by Atradius Dutch State Business (DSB), extended the ECI to Royal Boskalis Westminster N.V., to cover its EUR 1.5 billion contract for land development works at the airport project site in Bulakan, Bulacan. The NMIA project is the largest in Boskalis’ over 100-year history, and is also the largest export credit agency (ECA) insurance policy granted in the 90-year history of Atradius. SMC President and Chief Executive Officer Ramon S. Ang thanked the Dutch government for its support to NMIA, a project seen to catalyze sustainable economic growth for the Philippines, especially post-pandemic. It is seen to deliver over a million jobs to Filipinos. “This is a significant milestone not only for San Miguel and the NMIA project, but for the entire country. With this, we are closer to our dream of having a world-class, future-ready, and sustainably-built international gateway, proudly built by Filipinos for the Philippines. This also validates our work with Boskalis to ensure that this project is done right, and will provide long-term economic, environmental, and social benefits to our host communities and Bulacan province,” Ang said. In a statement posted on Boskalis’ international website, its CEO Peter Berdowski, said: “I am very pleased that all the hard work with a large team of experts has been successfully completed (today). For more than a year, we have worked intensively with Atradius DSB to ensure that the construction of the new airport will take place in a socially responsible manner.” He added: “In collaboration with Atradius DSB, the Dutch embassy, we succeeded in developing a broadly supported plan with an eye for the local community and the preservation of biodiversity. I would like to thank all those involved for their contribution to the positive decision of the State.” In the same statement, Atradius DSB Managing Director Bert Bruning said: “This project is unique on so many levels. Firstly, of course, as a very important contract for our client Boskalis, but also for us, as the largest ECA policy in our 90-year history,” he said. “In addition, I am proud of the fact that together with Boskalis and San Miguel, by keeping up the dialogue, we were able to ensure that the project is to meet international standards in the field of environmental and social conditions. In doing so, we have not only contributed to making this wonderful contract possible built also really made a difference together for the local communities and nature.” As part of the ECI process, a large group of experts from San Miguel, together with Boskalis and four renowned consultancy firms, conducted an extensive environmental and social impact assessment in accordance with the highest international standards. This process also included the conduct of impact analyses and compensation packages for adverse effects of the project. “This shows that the airport project and our environmental and social mitigation plans are not only sound, but robust and strong, given they can pass not only international standards but the exacting requirements of the Dutch government. It is another testament to the ability of Filipinos to be world-class,” Ang said. “We will continue to work with Atradius, the banks, experts, national and local government, and all stakeholders to ensure we will build this project in a sustainable manner and in compliance with the highest international environment and social standards,” Ang reaffirmed. added. The airport project will feature four parallel runways, a world-class terminal, and a modern and interlinked infrastructure network that includes expressways and railways. Article courtesy of San Miguel Corp
Philippine Resources - May 25, 2022
CTPCMC Allocates 7.7M for COVID-19 Initiatives
Article by: Roniel R. Arguillas - CTPCMC ICE Officer BAYANIHAN AMIDST THE COVID-19 BATTLE In order to protect and improve the lives of the people within the host and neighboring communities pursuant to Republic Act (RA) No. 11469 or the “Bayanihan to Heal as One Act”, CTP Construction and Mining Corporation or CTPCMC allocated 7.7 million pesos intended for the implementation of projects, programs, and activities (PPAs) on COVID-19 prevention. Through its Social Development and Management Program (SDMP) under Adlay Mining Project (AMP) and Dahican Nickel Project (DNP) the company implemented essential PPAs in the year 2021. The beneficiaries of PPAs were from the Host and Neighboring communities specifically Barangay Adlay, Barangay Dahican and Municipality of Carrascal. With an allocated budget of P2,060,803.78, a Covid-19 Assistance Center was put up to be the second line of support to the host communities if their existing Isolation Rooms have been fully occupied. The company’s employees and their dependents are to be prioritized in the center. The center is offering services which include free isolation room for those who are identified and confirmed as covid-19 patients, free vitamins, and over-the-counter drugs, 24/7 monitoring by health personnel and stand-by oxygen concentrators. Another PPA was the provision of 59 medical equipment and kits to Barangay Adlay. The provision included pulse oximeter, thermal scanner, LCD full digital ultrasound machine, hospital bed and refrigerator as vaccine storage. The turnover was done on December 14, 2021, held at Barangay Hall of Adlay. It was attended by Engr. Charlo R. Basadre CTPCMC Resident Mine Manager, Charid O. Cuadrillero ComRel Manager, Hon. Norberto O. Rubi Jr. Barangay Captain, and Raquel Bungcaras assigned nurse. “These are very essential and a huge help to the key front liners and to the people within the community.” Hon. Rubi said during the turnover. The company also provided two SDMP Emergency Response Vehicles for health-related emergencies.